Prepare a 3MF file for the Creality K2 Plus
MakerWorld and Bambu Studio files are prepared for Bambu printers. Below you can see what changes for the Creality K2 Plus, which limits are specific to this printer and how to adapt your file.
The conversion is written from the official Orca machine profile for the Creality K2 Plus. This target is new (beta): open the output in Orca and check the preview.
Creality K2 Plus specifications
| Bed | 350 × 350 mm |
|---|---|
| Maximum print height | 350 mm |
| Nozzle diameters | 0.2 / 0.4 / 0.6 / 0.8 mm |
| Maximum speed | 800 mm/s |
| Maximum acceleration | 30,000 mm/s² |
| Temperature limit | nozzle 350 °C · bed 120 °C · chamber 60 °C (manufacturer specification, unverified) |
| Color capacity | up to 16 (CFS) |
| Body | enclosed |
| Firmware (G-code flavor) | Klipper |
Dimensions come from OrcaSlicer’s official printer profiles; temperature limits are not in the profiles, so they rely on manufacturer specifications.
Comparison with the Bambu X1 Carbon
Most MakerWorld files are prepared for a Bambu printer like this; here is how the Creality K2 Plus differs.
| Feature | Bambu X1 Carbon | This printer | In conversion |
|---|---|---|---|
| Bed | 256 × 256 mm | 350 × 350 mm | larger: objects fit and are re-centered |
| Max speed | 500 mm/s | 800 mm/s | higher |
| Max acceleration | 20,000 mm/s² | 30,000 mm/s² | higher |
| Nozzle temperature limit | 300 °C | 350 °C | higher |
| Color capacity | up to 16 | up to 16 | same |
- Bed area is 1,225 cm²: about 187% of a Bambu X1 Carbon bed.
- Speed limit is about 160% of the X1 Carbon’s; acceleration limit is about 150%.
- Print height is 350 mm (+94 mm difference).
Which filaments fit this printer’s limits?
Typical nozzle temperatures of common filaments compared with the recorded limit of 350 °C.
| Filament | Typical nozzle temperature | On this printer |
|---|---|---|
| PLA | ≈ 230 °C | within the limit |
| PETG | ≈ 250 °C | within the limit |
| ABS / ASA | ≈ 270 °C | within the limit |
| PC | ≈ 290 °C | within the limit |
| PA-CF / PAHT | ≈ 300 °C | within the limit |
What to watch when preparing files for this printer
- The Creality K2 Plus bed is 350 × 350 mm: objects from Bambu files fit comfortably, and the converter moves them to the center of this bed.
- Maximum acceleration is 30,000 mm/s²: acceleration values in the file stay below this limit; anything above is clamped.
- Nozzle temperature limit 350 °C, bed 120 °C, chamber 60 °C. (This limit is the manufacturer’s specification and has not been verified.)
- Color capacity is at most 16 (CFS); the converter warns if the file has more colors.
- This printer runs Klipper: Bambu-specific start commands (M1002, M620/M621, G29.1…) do not work; the converter replaces them with the printer’s own start and end G-code.
For step-by-step use see the main page; in the converter just select Creality K2 Plus under “Yazıcım” (My printer). The tool interface is in Turkish.
Frequently asked questions
Does a MakerWorld / Bambu 3MF file work directly on the Creality K2 Plus?
The machine settings inside the file are for a Bambu printer, so they may not match the Creality K2 Plus bed, speed and acceleration limits or G-code. The converter adapts them. The conversion is written from the official Orca machine profile for the Creality K2 Plus.
What are the bed and nozzle sizes of the Creality K2 Plus?
Bed 350 × 350 mm, maximum print height 350 mm; recorded nozzle diameters 0.2 / 0.4 / 0.6 / 0.8 mm. Values come from OrcaSlicer’s official printer profiles.
What is the maximum speed and acceleration of the Creality K2 Plus?
According to the Orca profile the maximum speed is 800 mm/s and the maximum acceleration 30,000 mm/s². Higher values in the file are clamped and shown in the report.
Which settings change in the conversion, and which are kept?
Layer height, wall count, infill, support, seam and color assignments are kept. G-code, bed, nozzle count, retraction and speed/acceleration limits come from the target printer’s profile. Speed, acceleration and temperature above the target’s limits are clamped; every change is listed in the report.