Prepare a 3MF file for the Prusa CORE One
MakerWorld and Bambu Studio files are prepared for Bambu printers. Below you can see what changes for the Prusa CORE One, which limits are specific to this printer and how to adapt your file.
The conversion is written from the official Orca machine profile for the Prusa CORE One. This target is new (beta): open the output in Orca and check the preview.
Prusa CORE One specifications
| Bed | 250 × 220 mm |
|---|---|
| Maximum print height | 270 mm |
| Nozzle diameters | 0.25 / 0.3 / 0.4 / 0.5 / 0.6 / 0.8 mm |
| Maximum speed | 350 mm/s |
| Maximum acceleration | 7,000 mm/s² |
| Temperature limit | nozzle 290 °C · bed 120 °C (manufacturer specification, unverified) |
| Color capacity | up to 5 (MMU3) |
| Body | enclosed |
| Firmware (G-code flavor) | Marlin 2 |
Dimensions come from OrcaSlicer’s official printer profiles; temperature limits are not in the profiles, so they rely on manufacturer specifications.
Comparison with the Bambu X1 Carbon
Most MakerWorld files are prepared for a Bambu printer like this; here is how the Prusa CORE One differs.
| Feature | Bambu X1 Carbon | This printer | In conversion |
|---|---|---|---|
| Bed | 256 × 256 mm | 250 × 220 mm | smaller: large objects may not fit |
| Max speed | 500 mm/s | 350 mm/s | lower: speeds are clamped |
| Max acceleration | 20,000 mm/s² | 7,000 mm/s² | lower: accelerations are clamped |
| Nozzle temperature limit | 300 °C | 290 °C | lower: high-temperature filaments are clamped |
| Color capacity | up to 16 | up to 5 | fewer: warning for extra colors |
- Bed area is 550 cm²: about 84% of a Bambu X1 Carbon bed.
- Speed limit is about 70% of the X1 Carbon’s; acceleration limit is about 35%.
- Print height is 270 mm (+14 mm difference).
Which filaments fit this printer’s limits?
Typical nozzle temperatures of common filaments compared with the recorded limit of 290 °C.
| Filament | Typical nozzle temperature | On this printer |
|---|---|---|
| PLA | ≈ 230 °C | within the limit |
| PETG | ≈ 250 °C | within the limit |
| ABS / ASA | ≈ 270 °C | within the limit |
| PC | ≈ 290 °C | within the limit |
| PA-CF / PAHT | ≈ 300 °C | exceeds the limit (290 °C): clamped or not printable |
What to watch when preparing files for this printer
- MakerWorld and Bambu files are mostly prepared for a 256 × 256 mm bed. The Prusa CORE One bed is 250 × 220 mm, so objects close to 256 mm will not fit; the converter and the check report flag them immediately.
- Maximum acceleration is 7,000 mm/s²; the 10000–20000 mm/s² values common in Bambu files cannot be applied on this printer and would cause vibration. The converter clamps acceleration to this limit.
- Maximum speed is 350 mm/s; the fast Bambu profile speeds (300–600 mm/s) are reduced to this limit.
- Nozzle temperature limit 290 °C, bed 120 °C. Filaments that need 280–300 °C (PA, PC) exceed this printer’s limit. (This limit is the manufacturer’s specification and has not been verified.)
- Color capacity is at most 5 (MMU3); the converter warns if the file has more colors.
- This printer runs Marlin 2: Bambu-specific start commands (M1002, M620/M621, G29.1…) do not work; the converter replaces them with the printer’s own start and end G-code.
For step-by-step use see the main page; in the converter just select Prusa CORE One under “Yazıcım” (My printer). The tool interface is in Turkish.
Frequently asked questions
Does a MakerWorld / Bambu 3MF file work directly on the Prusa CORE One?
The machine settings inside the file are for a Bambu printer, so they may not match the Prusa CORE One bed, speed and acceleration limits or G-code. The converter adapts them. The conversion is written from the official Orca machine profile for the Prusa CORE One.
What are the bed and nozzle sizes of the Prusa CORE One?
Bed 250 × 220 mm, maximum print height 270 mm; recorded nozzle diameters 0.25 / 0.3 / 0.4 / 0.5 / 0.6 / 0.8 mm. Values come from OrcaSlicer’s official printer profiles.
What is the maximum speed and acceleration of the Prusa CORE One?
According to the Orca profile the maximum speed is 350 mm/s and the maximum acceleration 7,000 mm/s². Higher values in the file are clamped and shown in the report.
Which settings change in the conversion, and which are kept?
Layer height, wall count, infill, support, seam and color assignments are kept. G-code, bed, nozzle count, retraction and speed/acceleration limits come from the target printer’s profile. Speed, acceleration and temperature above the target’s limits are clamped; every change is listed in the report.