Prepare a 3MF file for the Bambu Lab H2D
MakerWorld and Bambu Studio files are prepared for Bambu printers. Below you can see what changes for the Bambu Lab H2D, which limits are specific to this printer and how to adapt your file.
There is no official Orca machine profile for this model yet: the conversion is limited (G-code and retraction are not changed); select the printer in your slicer after opening the file.
Bambu Lab H2D specifications
| Bed | 350 × 320 mm |
|---|---|
| Maximum print height | 325 mm |
| Nozzle diameters | 0.4 / 0.6 / 0.8 mm · 2 toolheads |
| Maximum speed | 1,000 mm/s |
| Maximum acceleration | 20,000 mm/s² (travel 9,000) |
| Temperature limit | nozzle 350 °C · bed 120 °C · chamber 65 °C (manufacturer specification, unverified) |
| Color capacity | up to 16 (AMS) |
| Body | enclosed |
| Firmware (G-code flavor) | Marlin |
Dimensions come from OrcaSlicer’s official printer profiles; temperature limits are not in the profiles, so they rely on manufacturer specifications.
Comparison with the Bambu X1 Carbon
Most MakerWorld files are prepared for a Bambu printer like this; here is how the Bambu Lab H2D differs.
| Feature | Bambu X1 Carbon | This printer | In conversion |
|---|---|---|---|
| Bed | 256 × 256 mm | 350 × 320 mm | larger: objects fit and are re-centered |
| Max speed | 500 mm/s | 1,000 mm/s | higher |
| Max acceleration | 20,000 mm/s² | 20,000 mm/s² | same |
| Nozzle temperature limit | 300 °C | 350 °C | higher |
| Color capacity | up to 16 | up to 16 | same |
- Bed area is 1,120 cm²: about 171% of a Bambu X1 Carbon bed.
- Speed limit is about 200% of the X1 Carbon’s; acceleration limit is about 100%.
- Print height is 325 mm (+69 mm difference).
Which filaments fit this printer’s limits?
Typical nozzle temperatures of common filaments compared with the recorded limit of 350 °C.
| Filament | Typical nozzle temperature | On this printer |
|---|---|---|
| PLA | ≈ 230 °C | within the limit |
| PETG | ≈ 250 °C | within the limit |
| ABS / ASA | ≈ 270 °C | within the limit |
| PC | ≈ 290 °C | within the limit |
| PA-CF / PAHT | ≈ 300 °C | within the limit |
What to watch when preparing files for this printer
- The Bambu Lab H2D bed is 350 × 320 mm: objects from Bambu files fit comfortably, and the converter moves them to the center of this bed.
- Maximum acceleration is 20,000 mm/s²: acceleration values in the file stay below this limit; anything above is clamped.
- Nozzle temperature limit 350 °C, bed 120 °C, chamber 65 °C. (This limit is the manufacturer’s specification and has not been verified.)
- Color capacity is at most 16 (AMS); the converter warns if the file has more colors.
For step-by-step use see the main page; in the converter just select Bambu Lab H2D under “Yazıcım” (My printer). The tool interface is in Turkish.
Frequently asked questions
Does a MakerWorld / Bambu 3MF file work directly on the Bambu Lab H2D?
The machine settings inside the file are for a Bambu printer, so they may not match the Bambu Lab H2D bed, speed and acceleration limits or G-code. The converter adapts them. There is no official machine profile for the Bambu Lab H2D yet: the conversion is limited (bed, height, nozzle and limits are adapted; G-code is not changed), so pick the printer in your slicer after opening the file.
What are the bed and nozzle sizes of the Bambu Lab H2D?
Bed 350 × 320 mm, maximum print height 325 mm; recorded nozzle diameters 0.4 / 0.6 / 0.8 mm. Values come from OrcaSlicer’s official printer profiles.
What is the maximum speed and acceleration of the Bambu Lab H2D?
According to the Orca profile the maximum speed is 1,000 mm/s and the maximum acceleration 20,000 mm/s². Higher values in the file are clamped and shown in the report.
Which settings change in the conversion, and which are kept?
Layer height, wall count, infill, support, seam and color assignments are kept. G-code, bed, nozzle count, retraction and speed/acceleration limits come from the target printer’s profile. Speed, acceleration and temperature above the target’s limits are clamped; every change is listed in the report.