Prepare a 3MF file for the Bambu Lab P1S
MakerWorld and Bambu Studio files are prepared for Bambu printers. Below you can see what changes for the Bambu Lab P1S, which limits are specific to this printer and how to adapt your file.
The conversion is written from the official Orca machine profile for the Bambu Lab P1S. This target is new (beta): open the output in Orca and check the preview.
Bambu Lab P1S specifications
| Bed | 256 × 256 mm |
|---|---|
| Maximum print height | 256 mm |
| Nozzle diameters | 0.2 / 0.4 / 0.6 / 0.8 mm |
| Maximum speed | 500 mm/s |
| Maximum acceleration | 20,000 mm/s² (travel 9,000) |
| Temperature limit | nozzle 300 °C · bed 100 °C (manufacturer specification, unverified) |
| Color capacity | up to 16 (AMS) |
| Body | enclosed |
| Firmware (G-code flavor) | Marlin |
Dimensions come from OrcaSlicer’s official printer profiles; temperature limits are not in the profiles, so they rely on manufacturer specifications.
Comparison with the Bambu X1 Carbon
Most MakerWorld files are prepared for a Bambu printer like this; here is how the Bambu Lab P1S differs.
| Feature | Bambu X1 Carbon | This printer | In conversion |
|---|---|---|---|
| Bed | 256 × 256 mm | 256 × 256 mm | same |
| Max speed | 500 mm/s | 500 mm/s | same |
| Max acceleration | 20,000 mm/s² | 20,000 mm/s² | same |
| Nozzle temperature limit | 300 °C | 300 °C | same |
| Color capacity | up to 16 | up to 16 | same |
- Bed area is 655.36 cm²: about 100% of a Bambu X1 Carbon bed.
- Speed limit is about 100% of the X1 Carbon’s; acceleration limit is about 100%.
- Print height is 256 mm (+0 mm difference).
Which filaments fit this printer’s limits?
Typical nozzle temperatures of common filaments compared with the recorded limit of 300 °C.
| Filament | Typical nozzle temperature | On this printer |
|---|---|---|
| PLA | ≈ 230 °C | within the limit |
| PETG | ≈ 250 °C | within the limit |
| ABS / ASA | ≈ 270 °C | within the limit |
| PC | ≈ 290 °C | within the limit |
| PA-CF / PAHT | ≈ 300 °C | within the limit |
What to watch when preparing files for this printer
- The Bambu Lab P1S bed is 256 × 256 mm, the same as Bambu files, so object placement usually stays unchanged.
- Maximum acceleration is 20,000 mm/s²: acceleration values in the file stay below this limit; anything above is clamped.
- Nozzle temperature limit 300 °C, bed 100 °C. (This limit is the manufacturer’s specification and has not been verified.)
- Color capacity is at most 16 (AMS); the converter warns if the file has more colors.
For step-by-step use see the main page; in the converter just select Bambu Lab P1S under “Yazıcım” (My printer). The tool interface is in Turkish.
Frequently asked questions
Does a MakerWorld / Bambu 3MF file work directly on the Bambu Lab P1S?
The machine settings inside the file are for a Bambu printer, so they may not match the Bambu Lab P1S bed, speed and acceleration limits or G-code. The converter adapts them. The conversion is written from the official Orca machine profile for the Bambu Lab P1S.
What are the bed and nozzle sizes of the Bambu Lab P1S?
Bed 256 × 256 mm, maximum print height 256 mm; recorded nozzle diameters 0.2 / 0.4 / 0.6 / 0.8 mm. Values come from OrcaSlicer’s official printer profiles.
What is the maximum speed and acceleration of the Bambu Lab P1S?
According to the Orca profile the maximum speed is 500 mm/s and the maximum acceleration 20,000 mm/s². Higher values in the file are clamped and shown in the report.
Which settings change in the conversion, and which are kept?
Layer height, wall count, infill, support, seam and color assignments are kept. G-code, bed, nozzle count, retraction and speed/acceleration limits come from the target printer’s profile. Speed, acceleration and temperature above the target’s limits are clamped; every change is listed in the report.